High precision Servo motor Drive Computer Control Battery Crush
Test Equipment Comply To UN38.3 IEC 62133 IEC1642
Main technical parameter:
Drive: Servo motor
Crush plate: dia. 20cm circular disc
Pressure range: 0~20KN
Crush speed: 0.01~20mm/s adjustable
1. Ctush force reach 13KN
2. Battery voltage drop at least 100mV (or 1/3)
3. Deformation of battery 50% or 1/10 of initial battery
Force display accuracy: 0.01N
Sensor resolution : 1/100,000
Compress space: 300*300*300mm(W*H*D) it means max. testable battery
Crush stroke: 300mm
Set up test condition and dispaly test data and Control on the
company test software.
The test software can monitoring the Crush force, dispalcement,
battery voltage, battery temperature.
Safety protection :
1. Over force protection: the sensor has built in force limit, in
order to avoid over force damage sensor and drive motor.
2. Out of phase and anti phase protection
3. Stroke limit protection
4. wire fuse over current protection
5. Overload protection
Test machine feature:
1. its two layer structure, upper and lower, upper is test chamber,
lower is for load bearing and storage.
2. Test chamber material:
Internal: 10mm thickness 45 # steel sheet with chromeplate
treatment and pasted with Teflon, its for anti-corrosion, anti
flaming, and easy to clean up after test.
External: 1.5mm thick A3 cold rolled steel sheet with baking
3. Inspection window: 200X200mm three layer vacuum explosion proof
4. Built in Anti explosion lighting
5. Exhaust port: Installed with exhaust fan diameter 120mm, with
exhaust duct, you can connect to you Lab exhaust system.
6. Test chamber door: electric lifting automaticlly.
7. Cable port: diameter 50mm
8. Safety door: there is a pressure relief port loated the back of
9. Castor: four movable castor equiped at the bottom of equipment.
Optional: video monitoring, fire extinguishing system, etc......
For more detail information please contact with us.